OKS Corrosion Protection & Inhibitors In Hyderabad
We, Deraz Engineers Corrosion Inhibitors dealers in Hyderabad since 3 decades. We are authorized OKS Corrosion Inhibitors dealers in Hyderabad. We supply various types of OKS Corrosion Inhibitors such as CHAIN LUBRICANT, TRANSPARENT – OKS 451, MAINTENANCE OIL – OKS 641, ROST BREAKER – OKS 621, CONTACT CLEANER – OKS 2621, etc.
CHAIN LUBRICANT, TRANSPARENT
- For fast-running chains and other machine elements subjected to high pressures or corrosive influences.
- Extremely high creep capacity.
- Highly adhesive.
- Resistant to throwing off.
- Excellent wear protection.
- Waterproof.
- For lubricating flexible drives.
ISO VG 320 DIN 51 502: CLP X 320
|
Application Tips |
Packaging |
| Operating temperature: -30°C -> +200°C NLGI grade:not applicable DN factor (dm x n):not applicable Base oil viscosity (40 °C):300 mm²/s Four-ball test rig (welding load):2,400 N |
300 ml aerosol 500 ml aerosol |
MAINTENANCE OIL
- For dismantling, lubrication and care of machine elements and metal surfaces.
- Good cleaning action.
- Temporarily protects aginst corrosion.
- Displaces moisture.
- For industry, workshop and hobby applications.
|
Application Tips |
Packaging |
| Operating temperature: -50°C -> +80°C Base oil viscosity (40°C): 7.3 mm²/s Salt spray test (sprayed on): > 110 h |
500 ml aerosol |
(F) ROST BREAKER
- Destruction-free dismantling of seized or rusted-in machine elements.
- Breaks open corrosion layers by cooling down to -40°C.
- Penetration of creep oil into microsize cracks.
- Fast-acting rust dissolver for industry, workshop and hobby applications.
|
Application Tips |
Packaging |
| Operating temperature: -10°C -> +40°C. Before applying, remove coarse soiling. Shake can before use. Spray on from distance of 10 – 15 cm and allow to soak in for approx. 1 – 2 min. Repeat as necessary |
400 ml aerosol |
CONTACT CLEANER
To remove soiling that can cause creepage currents. No running thanks to fast evaporation. Contains no chlorinated hydrocarbons. For example, for cleaning distribution boards, switches, relays, potentiometers, plug-in connections, sliding and screw contacts.
|
Application Tips |
Packaging |
| Switch off voltage and discharge electrostatic charging before use. Spray until desired cleanliness is achieved. Due to the wide variety of plastics used in electrical engi-neering, check plastics for corresponding resistance before use. |
400 ml aerosol |